crane instructions origami（Crane Origami Guide）

Today I will share with you the knowledge of crane instructions origami, which will also explain the crane instructions origami（Crane Origami Guide）. If you happen to be able to solve the problem you are currently facing, don’t forget to follow this website and start now!

List of contents of this article

• crane instructions origami
• crane origami instructions pdf
• crane origami instructions easy
• crane origami instructions printable
• flapping crane origami instructions

crane instructions origami

Crane Instructions: The Art of Origami

Origami, the ancient Japanese art of paper folding, offers a world of creativity and relaxation. One of the most iconic origami designs is the crane, symbolizing peace and good fortune. In this guide, we will provide step-by-step instructions on how to fold a crane, allowing you to embark on your own origami journey.

To begin, gather a square sheet of origami paper. If you don’t have any, you can easily create a square by folding a rectangular sheet diagonally and trimming the excess. Now, let’s get started:

1. Place the paper in a diamond shape, with one corner pointing upwards. Fold the paper in half diagonally, creating a triangle.

2. Unfold the triangle and repeat the previous step, folding it in half diagonally in the opposite direction. You should end up with a smaller triangle.

3. Rotate the paper so that the longest side of the triangle is at the bottom. Take the left corner and fold it towards the top corner, creating a smaller triangle.

4. Unfold the previous step and repeat it with the right corner. Now, you should have a diamond shape with two flaps at the bottom.

5. Flip the paper over and fold the bottom corner upwards, aligning it with the top corner. Crease well and unfold.

6. Now, open up the bottom part of the paper by gently pulling the left and right flaps apart. Flatten it into a square shape.

7. Fold the top corner of the square downwards, aligning it with the bottom corner. Crease well and unfold.

8. Open up the square by gently pulling the left and right sides apart. As you do this, the top part should collapse inward, forming a smaller square.

9. Rotate the paper so that the open part is facing towards you. Take the left and right corners and fold them towards the center, creating a kite-like shape.

10. Flip the paper over and repeat the previous step with the other side.

11. Fold the bottom corner upwards, aligning it with the top corner. Crease well and unfold.

12. Open up the bottom part of the paper by gently pulling the left and right flaps apart. Flatten it into a diamond shape.

13. Fold the top corner downwards, aligning it with the bottom corner. Crease well and unfold.

14. Carefully pull the left and right sides apart, bringing the top part downwards. As you do this, the paper should collapse into a waterbomb base.

15. Finally, lift one of the flaps and gently pull it upwards, while pressing the sides inward. Repeat this step with the other flap. Congratulations, you have folded an origami crane!

Remember, origami is an art form that requires patience and practice. Don’t be discouraged if your first crane doesn’t turn out perfect. With time, your skills will improve, and you’ll be able to create more intricate designs. Enjoy the process and let your creativity soar with the graceful folds of origami!

crane origami instructions pdf

Crane Origami Instructions PDF

Origami, the art of paper folding, has been practiced for centuries and is enjoyed by people of all ages. One of the most popular origami designs is the crane, a symbol of peace and good fortune. If you are looking for crane origami instructions in PDF format, you have come to the right place. In this guide, we will provide step-by-step instructions to help you create your own paper crane masterpiece.

To begin, make sure you have a square piece of origami paper. If you don’t have origami paper, you can easily cut a regular piece of paper into a square shape. Once you have your paper ready, follow these instructions:

1. Start with the colored side of the paper facing down. Fold the paper in half diagonally, creating a triangle.

2. Unfold the triangle and fold it in half diagonally again, in the opposite direction.

3. Unfold the triangle once more and rotate the paper so that the colored side is facing up.

4. Fold the paper in half horizontally, bringing the bottom edge to the top edge.

5. Unfold the paper and fold it in half vertically, bringing the left edge to the right edge.

6. Unfold the paper again and flip it over to the other side.

7. Fold the paper in half diagonally, creating a triangle.

8. Hold the paper with the open end facing away from you. Take the top layer of the right corner and fold it towards the center, aligning with the top edge.

9. Repeat the same fold with the left corner, bringing it towards the center and aligning with the top edge.

10. Flip the paper over to the other side.

11. Fold the bottom corner up, creating a small triangle at the top.

12. Take the right corner and fold it towards the center, aligning with the top edge.

13. Repeat the same fold with the left corner, bringing it towards the center and aligning with the top edge.

14. Fold the bottom corner up once more, creating a smaller triangle.

15. Carefully open up the model by gently pulling the sides apart. You will see the crane taking shape.

16. Fold the wings down by bringing the top layer of each wing towards the bottom.

17. Finally, fold the neck and tail of the crane to give it a more detailed look.

Congratulations! You have successfully created a paper crane using origami. Feel free to decorate your crane with colors, patterns, or even draw eyes to bring it to life. Remember, practice makes perfect, so don’t be discouraged if your first attempt is not perfect. With time and patience, you will be able to fold beautiful cranes effortlessly.

For a more visual guide, you can search online for “crane origami instructions PDF” to find downloadable PDFs with illustrations and diagrams that can enhance your learning experience. Have fun exploring the art of origami and enjoy the tranquility it brings!

crane origami instructions easy

Crane Origami Instructions: Easy and Fun!

Origami is the traditional Japanese art of paper folding, and one of the most popular origami designs is the crane. In this guide, we will provide you with easy-to-follow instructions to create your very own crane origami.

Materials needed:

– A square sheet of origami paper (or any square paper cut into a square shape)

– Your hands!

Step 1: Start with the colored side facing down. Fold the paper in half diagonally to form a triangle. Crease the fold well and unfold.

Step 2: Fold the paper in half again, but this time, fold it horizontally. Crease the fold well and unfold. You should now have two creases forming an “X” shape on your paper.

Step 3: Fold the paper in half vertically, bringing the left corner to meet the right corner. Crease the fold well and unfold. You should now have four creases forming a “+” shape on your paper.

Step 4: Flip the paper over to the colored side facing up. Fold the paper in half diagonally, bringing the top corner to meet the bottom corner. Crease the fold well and unfold.

Step 5: Now, bring the left corner of the paper to meet the center point where the creases intersect. Crease the fold well and unfold. Repeat the same step with the right corner.

Step 6: Flip the paper over to the colored side facing down. Fold the paper in half horizontally, bringing the top edge to meet the bottom edge. Crease the fold well and unfold.

Step 7: Gently pull the top layer of the paper upwards, following the creases you made in step 6. As you do this, the sides of the paper will naturally collapse inward. Flatten the sides to form a diamond shape.

Step 8: Fold the bottom corner of the diamond up to the top corner. Crease the fold well and unfold. Repeat the same step with the left corner and the right corner.

Step 9: Flip the paper over to the colored side facing up. Fold the left and right corners towards the center, aligning them with the vertical crease in the middle.

Step 10: Fold the top corner downwards, tucking it under the two flaps created in step 9. Crease the fold well.

Congratulations! You have successfully folded a crane origami. To give it a finishing touch, gently pull the wings apart and shape them to your liking. You can also draw eyes or decorate it as you wish.

Origami is a wonderful way to relax, improve focus, and unleash your creativity. With practice, you’ll be able to fold more intricate designs. Enjoy the art of origami and have fun creating beautiful paper cranes!

crane origami instructions printable

Crane Origami Instructions – Printable

Origami is the traditional Japanese art of paper folding, and one of the most popular origami designs is the crane. The crane holds a special significance in Japanese culture, symbolizing good luck, longevity, and peace. If you’re interested in creating your own crane origami, here are printable instructions to guide you through the process:

Materials needed:

– A square sheet of origami paper (preferably 15 x 15 cm)

– A flat surface to work on

Instructions:

1. Start with your square sheet of origami paper. If you have a rectangular sheet, fold one corner diagonally to create a square and trim off the excess paper.

2. Place the paper with the colored side facing down. Fold the paper in half diagonally, crease it well, and unfold.

3. Fold the paper in half diagonally in the opposite direction, crease it well, and unfold.

4. Now, flip the paper over to the other side with the colored side facing up.

5. Fold the paper in half horizontally, crease it well, and unfold.

6. Fold the paper in half vertically, crease it well, and unfold.

7. With the colored side still facing up, fold the paper in half diagonally, crease it well, and leave it folded.

8. Now, hold the paper from the bottom corner and fold it in half, bringing the bottom edge to meet the top edge. Crease it well and unfold.

9. Rotate the paper so that the open end is facing towards you.

10. Hold the paper from the bottom corner again and bring the right corner to meet the top corner. Crease it well and unfold.

11. Repeat step 10 for the left corner.

12. Now, you should have a smaller square shape with two flaps on the top.

13. Take the right flap and fold it upwards along the creases you made in step 10. Flatten it down and repeat for the left flap.

14. Flip the paper over to the other side.

15. Fold the bottom edge of the paper upwards, crease it well, and unfold.

16. Gently open the bottom edge of the paper and push it inwards along the creases you made in step 15. Flatten it down to form a diamond shape.

17. Fold the right and left corners of the diamond towards the center crease, creating a smaller diamond shape.

18. Fold the top corner of the smaller diamond downwards, crease it well, and unfold.

19. Open the top corner and push it inwards along the creases you made in step 18. Flatten it down to form a triangle shape.

20. Gently pull the two flaps on the sides of the triangle outwards. These will become the wings of the crane.

21. Finally, fold the tip of the triangle upwards to create the head of the crane.

Congratulations! You have successfully folded an origami crane. Remember to crease each fold well to ensure your crane holds its shape. You can use different colored papers or decorate your crane as desired. Enjoy the process and embrace the art of origami!

flapping crane origami instructions

Flapping Crane Origami Instructions

Origami, the art of paper folding, has been practiced for centuries and is loved by people of all ages. One popular origami design is the flapping crane, which not only looks elegant but also has a unique feature – it can flap its wings when you pull its tail.

To create your own flapping crane, follow these simple instructions:

1. Gather your materials: You will need a square sheet of paper, preferably origami paper, which is thin and easy to fold.

2. Start with the colored side facing down. Fold the paper in half diagonally, creating a triangle. Crease the fold well and then unfold it.

3. Fold the paper in half again, this time horizontally. Crease well and unfold it once more.

4. Now, fold the paper in half vertically. Crease the fold and leave it folded.

5. Take the top layer of the right side and fold it diagonally towards the center. Crease well and repeat the same step for the left side.

6. Flip the paper over and fold the bottom corner up to the top corner, creating a smaller triangle. Crease well and unfold it.

7. Open up the top layer of the right side, and using the creases as a guide, squash fold it down. Repeat this step for the left side.

8. Fold the top layer of the right side diagonally towards the center, aligning it with the existing creases. Repeat for the left side.

9. Flip the paper over once more. Fold the bottom corner up to the top corner, forming a smaller triangle. Crease well and unfold it.

10. Open up the right side of the paper and squash fold it down, using the creases as a guide. Repeat for the left side.

11. Now, fold the bottom edge of the paper up to the top edge, creating a rectangle. Crease well and unfold it.

12. Flip the paper over for the final steps. Fold the bottom corner up to the top corner, forming a smaller triangle. Crease well and unfold it.

13. Open up the right side and squash fold it down, using the creases as a guide. Repeat for the left side.

14. Finally, fold the bottom edge of the paper up to the top edge, creating a small square. Crease well and unfold it.

15. To make the crane flap its wings, hold the body of the crane and pull gently on its tail. Watch as the wings gracefully move up and down.

And there you have it! Your very own flapping crane origami. Display it proudly or give it as a gift to someone special. Enjoy the beauty of this ancient art form and let your imagination take flight!